SCROLL

Armatherm application

Armatherm™ 500

Foundation Wall Thermal Bridging Solution

Thermal Heat is lost at the periphery of the foundation due to bridging at foundation wall transitions. The external wall’s effective R Value decreases as a result. The thermal envelope of a building includes the foundation. Heat escapes from a structure at the junction of a slab on grade and a foundation wall as well as at the transition between an outside wall and a foundation. This is primarily caused by features of non-continuous insulation.

 

ARMATHERM™
500 Benefits

  • Essential for continuous insulation
  • Resistant to freeze thaw cycles
  • Simple installation technique 
  • Custom size to match masonry depths 

Foundation Wall Thermal Break

By adopting an effective, structural thermal break, the linear transmittance (heat loss) at the base of the foundation wall can be decreased by as much as 60%. A load-bearing thermal break material called ArmathermTM 500 is produced in a variety of densities to offer a range of load capabilities with R values as high as R 3.8 per inch.

By lengthening the slab insulation, thermal bridging at a foundation wall transition can be further minimised.

grid

Downloads

pdf429kB

Armatherm™ 500 Datasheet

pdf545kB

Armatherm™ 500 Submittal Sheet

pdf2MB

Armatherm™ Thermal Bridging Solutions Catalogue

Request a Quote

If you require a quotation and know the following product information, complete through form below.

    Get in touch

    Ready to talk about structural thermal breaks?

    armatherm
    Request a quote
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.