SCROLL

Applications

ArmaGirt™ Z Girt

Armatherm’s thermal fractured cladding support connection solutions stop potential condensation issues as well as excessive heat flow that would otherwise be brought on by thermal bridging. Moreover, wall assemblies made with Armatherm attachments will satisfy the effective R value requirements of the Canadian NECB energy code as well as the continuous insulation requirement of ASHRAE 90.1.

The thermal efficiency of wall designs can be improved in a number of ways by utilising ArmaGirt™ Z girts, according to modelling results, which reduce heat flow:

  • The wall assemblies’ insulation effectiveness dramatically improves, some reaching 98%.
  • Lower values of external insulation allow for the achievement of higher, effective wall assembly R values. For instance, steel girts need an external R value of 20 to achieve a R value of R-13 minimum to comply with ASHRAE zone 1, whereas Armatherm girts only need R 10.
  • With ArmaGirt™ Z girts, cladding wall assemblies can satisfy the R value criteria of ALL geographical zones for ASHRAE 2013 and NECB 2011 energy codes.
  • Reduces insulating cost and thickness.
  • Reduces the consumption of energy.

ARMAGIRT™
Benefits

  • Approved to NFPA 285 test standards
  • Works with a wide range of cladding systems
  • Direct replacement to conductive steel girts
  • Can run vertically and horizontally
  • Matches standard installation techniques
  • Excellent resistance to UV

Wall Assembly Efficiency Improvement

How can we design wall components that maximise insulation values, enhance cladding attachment details, and minimise costs while still adhering to energy code requirements?

The thermal performance of wall assemblies is considerably enhanced by Armatherm cladding attachments. With a mix of high mechanical and low thermal conductivity, ArmaGirt™ Z girts, Clip, and Thermal Break Shims carry load while minimising heat loss.

grid

Armatherm resources

Downloads

pdf428kB

Armatherm™ Thermal Breaks for Cladding

pdf827kB

ArmaGirt™ Submittal Sheet

pdf2MB

Armatherm™ Thermal Bridging Solutions Catalogue

What our clients
think about us

“I can always trust that ARMATHERM will deliver a reliable product on time. Their deep knowledge of the industry allows them to aid in project planning and design. ARMATHERM goes out of their way to help their customers get the service they need.”


Andrew Sarlo, Cives Steel Co.

“The team is always very helpful and persistent in delivering the best service possible for the customer and the project. At one point to went the extent of renting a U-Haul to get the product down to Raleigh when the carrier dropped the ball half way down from Mass. Excited for more opportunities ahead!”


James Clark, White Cap

“Dirigo Drywall can count on Armatherm to deliver quality thermal break products for our building projects that increase the building’s energy efficiency and help us meet energy compliance goals.”


Nathan P. Croteau, LEED-AP

“Armatherm was very accommodating with their customer service team in the release and delivery of materials to meet the schedule of the project. They also provided the necessary engineering information for us to ensure the product performed as required. Overall it was a smooth experience from Design to P.O. to Installation.”


Andrew Boesch, Eastern Exterior Wall Systems

“ARMATHERM has a commitment to producing quality products and excellent customer service that is second to none in their industry.  They are extremely easy to work with and hold true to their quoted lead times. The Steel Supply Company can count on ARMATHERM to deliver quality thermal break products for our building projects that increase the building’s energy efficiency and help us meet energy compliance goals.”


Frankie, The Steel Supply Company

“The quote came quick, short lead time/fast delivery, no troubles with installation, great technical support & most important – competitive pricing! We are also happy to support a local Massachusetts business!”


Pierre Gagnon, New England Finish Systems

“Armatherm products have been useful in addressing thermal bridging challenges in our projects. Armatherm products insulate many of the difficult structural thermal bridging details GPC Green Builders often encounter. The quoting is quick, the products are shipped on time, and the customer service is great.”


Ben Bogie, BPC Green Builders

“We are very happy with your service and dedication to your customers. I have found through the years your lead times are always in line with our requirements. I have talked to the shop and field and they have no issues with your product or installation. Keep up the good work.”


Paul Rosenthal,Novel Iron Works

“We utilized Armatherm’s thermal breaks to interrupt thermal bridges in several locations. From shelf angles, to dunnage, to door thresholds, Armatherm products offered the right balance of thermal performance and strength, and were simple to coordinate with our exterior wall details.”


Louis Koehl AIA CPHD, Handel Architects

Request a Quote

If you require a quotation and know the following product information, complete through form below.

    When it comes to projects that include cladding and panels, these are more often than not attached to the steel stud framing with a metallic Z Girt. The metal designs are highly conductive, and they can bypass the exterior insulation making it non continuous, resulting in thermal bridges. A thermal bridge, also known as a cold bridge, heat bridge, or thermal bypass, is an area which has higher thermal conductivity than the surrounding materials, creating a pathway for energy transfer. Thermal bridges at the steel girts connection are often overlooked when calculating a wall assembly’s true working U-value. Steel z girts, designed to carry exterior insulation, are very conductive, and because they are attached to the steel stud-wall, are a thermal bridge themselves! The unaccounted heat flow can cool the internal side of steel and aluminum attachments below the dewpoint of air in the wall cavity where condensation can occur, which can cause major issues during the building’s lifespan. Condensation can cause damp patches which can result in dangerous mold problems which can negatively affect a resident or visitor’s health. Armatherm, pultruded fiberglass Z Girts, are non conductive and provide a secure surface to attach siding or cladding.

    An ArmaGirt™ system is strong enough to hold most cladding and insulation details, and can improve the U value of cladding and wall panel assemblies by eliminating the use of a highly conductive metal girt and aluminum brackets creating wall assemblies that are up to 98% efficient. The addition of a fiberglass Z Girt, made from reinforced plastic, improves the U value of cladding and wall panel assemblies by eliminating the use of highly conductive metal girts and aluminum  brackets, creating wall assemblies that are up to 98% efficient. It’s imperative that specifiers, architects and structural engineers are up to speed with the latest in thermal break technology to ensure their buildings are made as efficiently as possible to protect the future of construction. ArmaGirt™ come in 7 standard sizes, 1.5”, 2”, 2.5”, 3”, 3.5”, 4”, 6”, which will satisfy most insulation requirements.  Our customers have been very satisfied with the quality and consistency of our Z Girts, and the quick quoting and fast delivery.

    We’ve provided thermally broken Z Girts for a number of prestigious projects to improve building efficiency. If you’d like to hear from any of the companies we’ve worked with, check out the testimonials on our website which include a number of constructions that feature fiberglass z-girts. We have glowing reviews and our team would be more than happy to put your mind at ease regarding any questions you may have regarding horizontal Z Girts.

    Thermal bridging solutions with ArmaGirt™ Z girts are always reliable, strong, and effective. We cannot ignore the importance of our thermal bridging solutions in reducing energy loss and enhancing envelope performance. This is especially true when used in conjunction with the wide selection of thermal break products offered by ArmathermTM. Also, our goods are made specifically to comply with modern construction rules. When deciding which product is best for you and your construction, our expert team is there to help and offer advice. This includes having specialised understanding of fibreglass Z Girts. Visit our website for useful online tools including test results, design aid, literature databases, and films of ZGirt product profiles. These can aid in your understanding of thermal break goods, important characteristics, and ideal applications.

    Get in touch

    Ready to talk about structural thermal breaks?

    armatherm
    Request a quote
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.