SCROLL

Armatherm application

Balcony Canopy Thermal Bridging Solution

The most common interface details for structural framing are canopies and balconies that use cantilevered steel or aluminum elements. These elements are typically connected to slab edges or spandrel beams on the interior side of the thermal envelope passing through insulation and air barrier layers. The U value of a wall assembly can be reduced by as much as 60% due to thermal bridging at balcony and canopy connections. The point transmittance (heat flow) at these connections can be reduced by as much as 70% by using Armatherm™ FRR structural thermal break material.

ARMATHERM™
FRR Benefits

  • Matches end plate design
  • Recommended minimum thickness one inch
  • Pads cut and drilled for ease of installation 
  • Lasts the life of the building

Balcony Thermal Break

Armatherm™ FRR is capable of transferring load in moment and shear connections without creating significant rotation. In structural testing, Armatherm™ FRR has been evaluated in balcony connections for creep, rotation and any impact on bolt force. A structural thermal break must maintain the structural integrity of the balcony or canopy connection, while also minimizing heat flow.

Downloads

pdf693kB

Armatherm™ FRR Datasheet

pdf382kB

Armatherm FRR Submittal Sheet

pdf1MB

Armatherm Thermal Bridging Solutions Catalogue

Request a Quote

If you require a quotation and know the following product information, complete through form below.

    request-a-quote

    Get in touch

    Ready to talk about structural thermal breaks?

    armatherm
    Request a quote
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.