SCROLL

Why choose
Armatherm™

Shipping-outlines-noloop

Same day delivery option

Tested-icon-noloop

Tested to ASTM standards

Stock-noloop

Stock always on hand

Manufacture-noloop

Manufactured in the US

Code-noloop

Code compliance

Leed-noloop

LEED benefits

Our
Accreditations

Bre-logo

Armatherm applications

Armatherm™ FRR — Masonry Shelf Angle Thermal Bridging Solution

Masonry veneer walls require tie-backs and shelf angles which form significant thermal bridges and can reduce a walls’ R value by as much as 50% making it difficult to meet energy codes.

Masonry-shelf-angle

Armatherm™ 500 – Column Base Thermal Bridging Solution (load dependent)

Steel columns traditionally extend through the building envelope (floor slab) and insulation at their base.

Armatherm™ 500 – Foundation Wall Thermal Bridging Solution (load dependent)

Foundations are part of a buildings’ thermal envelope. The intersection at a slab on grade to foundation wall and the exterior wall to foundation transition are both areas where heat flows out of a building due primarily to non-continuous insulation details.

Armatherm™ FRR – Balcony / Canopy Thermal Bridging Solution

The most common interface details for structural framing are canopies and balconies that use cantilevered steel or aluminum elements.

Armatherm-FRR

Armatherm™ FRR – Parapet Roof Penetration Thermal Bridging Solution

The roof is part of the building envelope where penetrations such as davits, anchors and supports for dunnage extend through the thermal envelope and roof insulation creating non-continuous insulation.

Armatherm-500

ArmaGirt™ Z-Girt – Cladding Thermal Bridging Solution

Armatherm cladding attachments significantly improve wall assembly thermal performance. ArmaGirt™ Z Girt, clip and thermal break shims provide a combination of low thermal conductivity and high compressive strength transferring load and reducing heat loss.

Armatherm-Z-Girt
Armatherm-thermal-bridging-balcony
12,509 Projects installed
2007 Established
40 + Countries supplied to

Thermal
Break resources

Take advantage of our valuable online resources on our website, including test reports, extensive literature libraries, design assistance and product profile videos to help you understand the importance of thermal break products, the key features of our products and the applications in which they can be used. If you require CAD drawings for your project, these can be accessed via the Armatherm™website and downloaded to be easily incorporated into your project plans.

Our easy-to-follow online thermal breaks webinar is also accessible online, with the course providing an overview and introduction to thermal bridging, discussing how and why it occurs, as well as how it can be prevented. It showcases and compares the difference between building details with and without thermal break solutions to demonstrate the necessity of determining accurate values of thermal transmittance within a project.

armatherm-mockup-lowv2

Armatherm resources

Downloads

pdf2MB

Armatherm™️ Thermal Bridging Solutions Catalogue

pdf429kB

Armatherm™️ 500 Data Sheet

pdf218kB

Armatherm™️ FRR Data Sheet

pdf585kB

Armatherm™️ Thermal Breaks for Cladding

pdf85kB

Armatherm™️ Z-Grit Submittal Sheet

Request a quote

If you require a quotation and know the following product information, complete through form below.

    request-a-quote

    Get in touch

    Ready to talk about structural thermal breaks?

    armatherm
    Request a quote
    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.