grid
SCROLL

How effective are thermal breaks at reducing heat loss?

Thermal conductivity reveals the rate at which heat flows through a material. It’s important to understand the conductivity of building materials, so the efficiency of the structure can be determined. Heat flow is usually dependent on two factors, area of a wall or roof assembly for instance, and temperature difference from inside to outside. Any material with high thermal conductivity will transfer heat energy at a higher rate, given the same conditions of temperature.

Thermal breaks can be distinguished by the thermal conductivity, often referred to as the K value and the thermal resistance, referred to as the R value. The relationship between these two values means one can be calculated by using the other, helping to determine the overall efficiency. For architects working towards creating efficient structures, thermal models which feature the K and R values can be created to detail the efficiency of the building envelope and roof assembly. This allows designers to make meaningful changes before construction begins

Thermal modelling is an important step in the process of creating and adjusting details in efficient structures. When conductive construction materials are used within a structure such as steel, heat does not travel in straight paths. If it did travel in parallel paths, we could use simple maths equations and area-weighted averaging – a mathematical technique for combining different amounts of various components into a single number – to determine the heat flow. In addition, most interfaces and transitions are complex and feature corners or additional features that make it more difficult to calculate.

Where can thermal breaks help?

As much as 30% of a wall assembly’s heat loss can be lost via a balcony installation, and steel z-girts can reduce the R value of a wall as much as 50%. Bridges can also occur within the following connections; column base, masonry shelf angle, canopy, roof penetrations and foundation wall connections, all of which can result in energy loss.

Creating a thermal model means you will be able to see the actual R and U values of the assembly without a thermal break, the updated values when thermal breaks are incorporated and how much the heat loss is improved with the addition of the breaks. It can also predict the surface temperatures of the materials in the assembly which will indicate whether condensation is likely to occur.

Thermal breaks have much less lower thermal conductivity and will resist the flow of heat from conditioned to unconditioned places. There is an ideal thickness of thermal breaks depending on the goals. In some instances, using a thermal break that is too thin will decrease the effectiveness of the thermal break due to the increase in area of the highly conductive steel. Research into several thermal break materials has shown that the thickness should be at least 1” to achieve significant heat loss reductions. In all cases, structural engineering must be verified.

In any application using a thermal break, the main aim is to find the appropriate thickness/area combination that helps the wall or roof assembly meet the U value requirement based on energy codes and regulations.

grid

Condensation

An effective thermal break will work towards significantly minimising heat flow, while also keeping the interior surfaces at these connections above the dew point. This is particularly imperative when it comes to connections like these that appear in buildings that experience higher than normal humidity levels, based on geography and usage.

Another benefit is that using a thermal break helps control material surface temperatures. The bridges allow heat from interior, conditioned spaces to flow out through the building envelope and into the outside. To prevent condensation from forming within the thermal envelope, the surface temperatures of any materials used within the structure must be kept above the dew point temperature to stop any condensation occurring on these interior spots.

How to choose?

Depending on the application you’re looking to isolate thermally, we offer a wide range of solutions with different benefits.

FRR

The Armatherm™FRR thermal break is extremely durable and strong material, making it suitable for supporting heavy loads while cutting conductive heat loss.

Z girt

The ArmaGirt™ Z Girt is a nonconductive cladding support system, strong enough to hold most cladding and insulation details onto the building envelope. These innovative products can improve the efficiency of a wall assembly by as much as 98%.

500

Armatherm 500 is a high strength, polyurethane material which we manufacture in several densities for inclusion within a wide range of different building loads. It is a great option for column bases to ensure minimum heat flow into the ground.

The effectiveness of thermal breaks have been proven ten fold, and the benefits should not be overlooked. With up to 98% more efficiency on the table for construction projects and new regulations frequently come into play.

Other Articles
& Projects

Thermal break articles

Armatherm Upcoming Events

Thermal break articles

Modular construction: improving energy efficiency

Thermal break articles

Armatherm’s 2024 Exhibitor Events

Thermal break articles

Thermal breaks specialists improve energy efficiency of luxury hotel by 60%

Thermal break articles

Thermal breaks are the missing links in continuous insulation

Thermal break articles

Ultra-high strength polyurethane can control heat loss through steel framing

Thermal break articles

Thermal bridging: Where does it occur

Thermal break articles

Why aren’t thermal breaks used more in construction projects?

Thermal break articles

How To Maximize The Efficiency of Cold Storage Facilities

Thermal break articles

Choosing The Right Compressive Strength For Your Thermal Breaks

Get in touch

Ready to talk about structural thermal breaks?

armatherm
Request a quote
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.